Pentair Everpure 4C Professional Water Filter

The Pentair Everpure 4C professional water filter is ideal for problem water areas and produces excellent water quality . With its large capacity of 11,355 liters , it effectively reduces the taste and smell of chlorine as well as other offensive impurities that can adversely affect the taste of water and beverages. It also reduces, by mechanical means, ultra-fine sediments and particles smaller than 0.5 microns in size .

• Submicron Precoat Filtration technology reduces potential health contaminants such as asbestos fibers and Cryptosporidium and Giardia cysts .

The compact carbon filter has thousands of tiny pores that make this filter highly absorbent and effective in removing contaminants and impurities such as chlorine and volatile organic compounds, leaving a refined water, ideal for high quality drinks and food. Chlorine can be detected after water treatment in municipal networks.

Changing filters is simple, fast and clean , as their internal parts are never exposed and thus can not be contaminated during the change process.

It is particularly effective for:

• Reduction of calcium accumulation * which can cause excessive downtime, increased maintenance costs and higher energy costs.
• Reduction of chlorine and volatile organic compounds.
• Reduction of turbidity and load-bearing particles: The filter construction technology removes water particles up to 0.5 microns in size from the water .

* As tested by Pentair® Everpure.

• The filter is installed in conjunction exclusively with the Everpure® QL3B filter head which you include.

Applications of Pentair Everpure 4C Professional Water Filter

• Coffee - Espresso Machines
• Post-mix
• Water coolers
• Ice machines
• Food Processing Applications
• Vending Machines (Vending Machines and OCS)

Installation Tips

• Use a 3/8 γραμμή water line.
• Install vertically with the container hanging down.
• Leave the gap of 6.35 cm below the cartridge for easy replacement of the replacement filter.
• Allow the running water to pass through the filter for five (5) minutes at full flow.

Operation / Maintenance Tips

• Replace the filter with a regular 6-12 month preventive maintenance program (depending on the quality of the incoming water).
• Replace the filter when the pressure drops below 0.7 bar.
• The flow rate should not exceed 1.9 lt / min.

The Pentair Everpure 4C is made in the United States of America (Made in USA)

NSF certification of Pentair Everpure 4C Professional Water Filter

• NSF® / ANSI tested and certified according to NSF 42 : Reduction of infectious agents, such as chlorine removal and better taste and smell.

NSF 42 specifies specifications for the reduction of pollutants such as taste and odor of chlorine.

• NSF® / ANSI tested and certified according to NSF 53 : Reduction of cysts such as Cryptosporidium and Giardia by mechanical means.

NSF 53 sets standards for cyst reduction (Cryptosporidium, Giardia).